KVR400X64SC3A/1G 1GB

KVR400X64SC3A/1G 1GB

Postby owentje » Wed Jul 22, 2009 10:22 am

I have tried two of these in my NV+. The result was a non booting NV+. This memorymodule should be removed from the compatibility list. The user 'geekstarpilot' experienced also the same problem with this module. On the internet are more posts regarding this module using the Readynas DUO (also with problems).
So I do not recommend using this (I guess the current revision is somehow a bit different compared to the ones which other users are using with success)
ReadyNAS Newbie
Posts: 20
Joined: Tue Jun 30, 2009 8:32 am
Location: Netherlands
ReadyNAS: Pro

Re: KVR400X64SC3A/1G 1GB

Postby Gnagman » Sat Nov 14, 2009 2:32 pm

Have the same problem, the KVR400x64SC3A/1G does NOT work. Remove it from the compatibility list.
ReadyNAS Newbie
Posts: 1
Joined: Sat Nov 14, 2009 2:28 pm
ReadyNAS: NV+

Re: KVR400X64SC3A/1G 1GB

Postby Optik » Tue Aug 02, 2011 12:11 pm

Just encounted the very much earlier comments about this. By accident found positive views about this memory module (well before I found this info) - so installed on NAS Duo 2 x Tbye RAID 4.1.7 setup - has functioned perfectly from the off - now been running continuously for 5 months. Don't know the cause of the problem with higher spec NASs.
ReadyNAS Newbie
Posts: 3
Joined: Sat Jun 11, 2011 8:38 am
ReadyNAS: Duo

Return to Memory

Who is online

Users browsing this forum: No registered users and 1 guest