NETGEAR ReadyNAS

Community Forum

Skip to content

Netgear Surveillance will not install

NETGEAR ReadyNAS® Surveillance, a comprehensive IP surveillance solution incorporating surveillance software, storage, switching and network management.
Post a reply

Netgear Surveillance will not install

Postby Busbar » Fri Jun 01, 2012 2:34 am

Hi all,

I have attempted to install the new surveillance add on and the error 'bad architecture' occurs.

System is Ready Nas NV+ V2 with firmware 5.3.5.

Any ideas or suggestions?

Busbar
Busbar
ReadyNAS Newbie
 
Posts: 4
Joined: Mon May 28, 2012 9:30 am
ReadyNAS: NV+ v2
Top

Re: Netgear Surveillance will not install

Postby mdgm » Fri Jun 01, 2012 2:45 am

Currently NetGear ReadyNAS Surveillance is only available for x86 ReadyNAS (e.g. Ultra/Pro) not ARM ReadyNAS (e.g. Duo/NV+ v2).
Useful links: My ReadyNAS Gear|FAQ|Hardware Compatibility List|Docs: Setup Guide, Manual|Downloads|Unofficial Tips|GPL|MDGM on Twitter|MDGM's Unofficial Guides
NB: A ReadyNas is not an excuse not to have a backup. Fire, theft, multiple disk failures, other hardware failure, floods, user negligence etc. can all result in loss of data.
How we users can contact NETGEAR Technical Support | Australia: 1300 361 254 / Other Numbers|Online Submission
Unofficial Guide for Moving from Sparc ReadyNAS to x86 ReadyNAS|Using Gmail with the ReadyNAS|XRAID Volume Size Calculator
User avatar
mdgm
ReadyNAS Enthusiast
 
Posts: 28913
Joined: Tue Feb 17, 2009 9:34 pm
Location: Down Under
ReadyNAS: RN516
Top

Re: Netgear Surveillance will not install

Postby Busbar » Fri Jun 01, 2012 2:54 am

Many thanks MDGM, it would help if I had read the release notes properly -DOH!. Do you know if an ARM release is planned?

Busbar
Busbar
ReadyNAS Newbie
 
Posts: 4
Joined: Mon May 28, 2012 9:30 am
ReadyNAS: NV+ v2
Top

Re: Netgear Surveillance will not install

Postby mdgm » Fri Jun 01, 2012 3:13 am

I believe it is planned. No ETA at this time.
Useful links: My ReadyNAS Gear|FAQ|Hardware Compatibility List|Docs: Setup Guide, Manual|Downloads|Unofficial Tips|GPL|MDGM on Twitter|MDGM's Unofficial Guides
NB: A ReadyNas is not an excuse not to have a backup. Fire, theft, multiple disk failures, other hardware failure, floods, user negligence etc. can all result in loss of data.
How we users can contact NETGEAR Technical Support | Australia: 1300 361 254 / Other Numbers|Online Submission
Unofficial Guide for Moving from Sparc ReadyNAS to x86 ReadyNAS|Using Gmail with the ReadyNAS|XRAID Volume Size Calculator
User avatar
mdgm
ReadyNAS Enthusiast
 
Posts: 28913
Joined: Tue Feb 17, 2009 9:34 pm
Location: Down Under
ReadyNAS: RN516
Top

Re: Netgear Surveillance will not install

Postby readysecure1985 » Fri Jun 01, 2012 8:42 am

I will look into that ARM release request for you.
NETGEAR ReadyNAS Support
Contact Information: http://support.netgear.com/general/contact/default.aspx
(US/Canada) 1-888-NETGEAR or 1-855-PRO-SAFE / (UK) +44(0)8448 75 4000
readysecure1985
NETGEAR Support
 
Posts: 758
Joined: Wed Jul 13, 2011 10:20 am
ReadyNAS: RN516
Top

Re: Netgear Surveillance will not install

Postby Segran » Thu Jun 14, 2012 10:27 am

Any news regarding the ARM version of ReadyNAS Surveillance? I bought Nv+ V2 without noticing that Surveillance SAS not available......
Segran
ReadyNAS Newbie
 
Posts: 4
Joined: Mon Jun 11, 2012 12:48 pm
ReadyNAS: NV+ v2
Top

Re: Netgear Surveillance will not install

Postby Digsy » Fri Jun 15, 2012 1:02 am

Apologies for not seeing this earlier. I believe I have an ARM based ReadyNAS Duo and am looking for an alternative surveillance solution so I'd be interested in an ARM release, too.
Digsy
ReadyNAS Newbie
 
Posts: 28
Joined: Fri Jan 08, 2010 3:29 am
ReadyNAS: Duo
Top

Re: Netgear Surveillance will not install

Postby thyrisis » Sat Jun 30, 2012 2:32 am

Hi, sorry to join in the "me too" posts but I have an ARM based Duo v2 and would also like to know if / when an ARM port of this add-on will be available?
thyrisis
ReadyNAS Newbie
 
Posts: 1
Joined: Sat Jun 30, 2012 2:30 am
ReadyNAS: Duo v2
Top

Re: Netgear Surveillance will not install

Postby HERBIEO » Sat Jun 30, 2012 2:54 am

Digsy wrote:Apologies for not seeing this earlier. I believe I have an ARM based ReadyNAS Duo and am looking for an alternative surveillance solution so I'd be interested in an ARM release, too.


Digsy are you sure you have ARM your profile says Duo which is SPARC Duo v2 is ARM,
How to tell > http://www.rnasguide.com/2012/01/09/how-to-tell-whether-i-have-a-duo-v1-or-duo-v2-or-nv-v1-or-nv-v2/
ReadyNas Duo v2 ------ Firmware: RAIDiator 5.3.7
UPS ---------------------- APC Back-UPS 550G-UK
Network: --------------- Netgear WNDR4500 Router - TP-Link-SG1005D Gigabit Switch
OS: ---------------------- Windows 7 Ultimate (64-bit)
CPU Info: --------------- Intel(R) Core(TM) i7 CPU 920 @ 3239.0 MHz
Memory (RAM): -------- 6136 MB
Motherboard: --------- ASUSTeK Computer INC. Rampage II Extreme
Network Adapters: -- Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller
User avatar
HERBIEO
Advanced ReadyNAS Expert
 
Posts: 522
Joined: Wed May 23, 2012 8:58 am
Location: UK
ReadyNAS: Duo v2
Top

Re: Netgear Surveillance will not install

Postby mdgm » Sat Jun 30, 2012 4:12 am

If there will be a port for the Duo v2 there's currently no ETA.

The Duo (v1) Sparc definitely won't be getting Surveillance
Useful links: My ReadyNAS Gear|FAQ|Hardware Compatibility List|Docs: Setup Guide, Manual|Downloads|Unofficial Tips|GPL|MDGM on Twitter|MDGM's Unofficial Guides
NB: A ReadyNas is not an excuse not to have a backup. Fire, theft, multiple disk failures, other hardware failure, floods, user negligence etc. can all result in loss of data.
How we users can contact NETGEAR Technical Support | Australia: 1300 361 254 / Other Numbers|Online Submission
Unofficial Guide for Moving from Sparc ReadyNAS to x86 ReadyNAS|Using Gmail with the ReadyNAS|XRAID Volume Size Calculator
User avatar
mdgm
ReadyNAS Enthusiast
 
Posts: 28913
Joined: Tue Feb 17, 2009 9:34 pm
Location: Down Under
ReadyNAS: RN516
Top

Re: Netgear Surveillance will not install

Postby tjsnow » Fri Feb 08, 2013 8:55 am

Just nudging the conversation. Has anyone found an IP Camera surveillance add-on for ARM yet?
tjsnow
ReadyNAS Newbie
 
Posts: 5
Joined: Mon Feb 04, 2013 6:06 pm
Top

Re: Netgear Surveillance will not install

Postby readysecure1985 » Tue Feb 12, 2013 3:25 pm

I have doubts that Surveillance will be released for ReadyNAS ARM units.
NETGEAR ReadyNAS Support
Contact Information: http://support.netgear.com/general/contact/default.aspx
(US/Canada) 1-888-NETGEAR or 1-855-PRO-SAFE / (UK) +44(0)8448 75 4000
readysecure1985
NETGEAR Support
 
Posts: 758
Joined: Wed Jul 13, 2011 10:20 am
ReadyNAS: RN516
Top

Re: Netgear Surveillance will not install

Postby mdgm » Tue Feb 12, 2013 3:26 pm

readysecure1985 wrote:I have doubts that Surveillance will be released for ReadyNAS ARM units.

I agree. Any add-on for ARM would likely need to be a 3rd party one.
Useful links: My ReadyNAS Gear|FAQ|Hardware Compatibility List|Docs: Setup Guide, Manual|Downloads|Unofficial Tips|GPL|MDGM on Twitter|MDGM's Unofficial Guides
NB: A ReadyNas is not an excuse not to have a backup. Fire, theft, multiple disk failures, other hardware failure, floods, user negligence etc. can all result in loss of data.
How we users can contact NETGEAR Technical Support | Australia: 1300 361 254 / Other Numbers|Online Submission
Unofficial Guide for Moving from Sparc ReadyNAS to x86 ReadyNAS|Using Gmail with the ReadyNAS|XRAID Volume Size Calculator
User avatar
mdgm
ReadyNAS Enthusiast
 
Posts: 28913
Joined: Tue Feb 17, 2009 9:34 pm
Location: Down Under
ReadyNAS: RN516
Top

Re: Netgear Surveillance will not install

Postby readysecure1985 » Tue Feb 12, 2013 3:27 pm

I will continue to be on the lookout for similar software for you, though.
NETGEAR ReadyNAS Support
Contact Information: http://support.netgear.com/general/contact/default.aspx
(US/Canada) 1-888-NETGEAR or 1-855-PRO-SAFE / (UK) +44(0)8448 75 4000
readysecure1985
NETGEAR Support
 
Posts: 758
Joined: Wed Jul 13, 2011 10:20 am
ReadyNAS: RN516
Top

Re: Netgear Surveillance will not install

Postby tjsnow » Thu Feb 28, 2013 5:32 pm

Bump..

Just a follow up... Is it possible to install something like Zoneminder on the readynas (not an addon), and use it on it's own port through the web UI?

Also, just sharing my frustration that there is no add-on yet for ARM
tjsnow
ReadyNAS Newbie
 
Posts: 5
Joined: Mon Feb 04, 2013 6:06 pm
Top
Next
Post a reply

Return to ReadyNAS Surveillance



Who is online

Users browsing this forum: No registered users and 3 guests

Powered by phpBB® Forum Software © phpBB Group
Time : 0.049s | 18 Queries | GZIP : Off | Load : 0.39