The amber LED on the back of my ReadyNAS NV+ v1 is on when connected to my Netgear GS 108 Gigabit switch. (green blinking with activity)
When the NAS is operating in Gigabit mode this should be off according to the manual.
(
• Green on, amber off. 1000 Mbps connection speed, no activity
• Green blinking, amber off. 1000 Mbps connection speed, activity
• Green off, amber on. 10 Mbps or 100 Mbps connection speed, no activity
• Green off, amber blinking. 10 Mbps or 100 Mbps connection speed, no activity
)
Frontview reports: Online / 1000 Mbit / Full-duplex
Read- and Write speeds max out at 13 MB/s.
Is the manual right and if so, how can I fix this situation.
Amber LED on Ethernet Panel on!
3 posts
• Page 1 of 1
Amber LED on Ethernet Panel on!
by Willem Smith » Wed Jul 04, 2012 1:40 pm
- Willem Smith
- ReadyNAS Newbie
- Posts: 2
- Joined: Wed Jul 04, 2012 1:29 pm
- ReadyNAS: NV+
Re: Amber LED on Ethernet Panel on!
by mdgm » Wed Jul 04, 2012 5:16 pm
What ethernet cable are you using? Can you check to make sure it is a Cat5e or newer ethernet cable?
What version of RAIDiator are you running? The latest is 4.1.9: http://www.readynas.com/RAIDiator_4_1_9_Notes
What version of RAIDiator are you running? The latest is 4.1.9: http://www.readynas.com/RAIDiator_4_1_9_Notes
Useful links: My ReadyNAS Gear|FAQ|Hardware Compatibility List|Docs: Setup Guide, Manual|Downloads|Unofficial Tips|GPL|MDGM on Twitter|MDGM's Unofficial Guides
NB: A ReadyNas is not an excuse not to have a backup. Fire, theft, multiple disk failures, other hardware failure, floods, user negligence etc. can all result in loss of data.
How we users can contact NETGEAR Technical Support | Australia: 1300 361 254 / Other Numbers|Online Submission
Unofficial Guide for Moving from Sparc ReadyNAS to x86 ReadyNAS|Using Gmail with the ReadyNAS|XRAID Volume Size Calculator
NB: A ReadyNas is not an excuse not to have a backup. Fire, theft, multiple disk failures, other hardware failure, floods, user negligence etc. can all result in loss of data.
How we users can contact NETGEAR Technical Support | Australia: 1300 361 254 / Other Numbers|Online Submission
Unofficial Guide for Moving from Sparc ReadyNAS to x86 ReadyNAS|Using Gmail with the ReadyNAS|XRAID Volume Size Calculator
-
mdgm - ReadyNAS Enthusiast
- Posts: 28599
- Joined: Tue Feb 17, 2009 9:34 pm
- Location: Down Under
- ReadyNAS: RN312
Re: Amber LED on Ethernet Panel on!
by Willem Smith » Thu Jul 05, 2012 12:03 am
I'm using cat 5e cable.
Running RAIDiator 4.1.9
Funny thing is: 'amber on, green blinking' isn't descibed in the manual! What does it mean?
Running RAIDiator 4.1.9
Funny thing is: 'amber on, green blinking' isn't descibed in the manual! What does it mean?
- Willem Smith
- ReadyNAS Newbie
- Posts: 2
- Joined: Wed Jul 04, 2012 1:29 pm
- ReadyNAS: NV+
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest