Internet stops working from your PC? Or from the NAS (or both)?.samuk wrote:I have a netgear 1GB switch already...
the nas \ pc \ BT router are connected to this..
Jumbo frames enables fast copy by internet stops working..
On the NAS, there is a network statistics pop-up that you can see (the control is next to the NIC speed on network interfaces).samuk wrote:internet stops working on the PC..but logmein still works as i am able to remotly log in to the pc from work.
Have not checked the network stats on the nas - its a 1GB netgear switch (the blue business ones)
no erros present when i check the nas - do i need a plugin to check further in depth?
I suspect logmein works because it is using a 1500 byte MTU, even if jumbo frames are on.sleepy06405 wrote:Your symptoms are very odd. You lose the ability to browse the internet but logme in still works? Logmein is basically doing the same thing as a www browser does. Do you have any vpn clients installed or anything that would have added additional phantom network adapters to windows?
It is not modifying the MTU, I didn't mean to suggest that. Like all applications it does have control over the message sizes it chooses to send. Logmein also uses UDP, so TCP negotiation is not a factor.sleepy06405 wrote:I have trouble accepting the idea that logmein can modify the mtu. MTU is down at layer 3/4 and logmein is up at layer 6/7 of the osi model. Apps don't jump layers. But I'll butt out, I'm new here
Users browsing this forum: No registered users and 3 guests