any transmission updates?
5 posts
• Page 1 of 1
any transmission updates?
by ricostuart » Fri Jun 15, 2012 11:29 am
Is there any futher updates to transmission at all? The latest one for me is super slow GUI (anyone know how to speed this up?)
- ricostuart
- ReadyNAS Newbie
- Posts: 19
- Joined: Thu May 17, 2012 3:24 am
- ReadyNAS: NV+
Re: any transmission updates?
by HERBIEO » Sat Jun 16, 2012 9:46 am
That's strange its not slow on my duo v2 maybe something else going on making it slow.
ReadyNas Duo v2 ------ Firmware: RAIDiator 5.3.7
UPS ---------------------- APC Back-UPS 550G-UK
Network: --------------- Netgear WNDR4500 Router - TP-Link-SG1005D Gigabit Switch
OS: ---------------------- Windows 7 Ultimate (64-bit)
CPU Info: --------------- Intel(R) Core(TM) i7 CPU 920 @ 3239.0 MHz
Memory (RAM): -------- 6136 MB
Motherboard: --------- ASUSTeK Computer INC. Rampage II Extreme
Network Adapters: -- Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller
UPS ---------------------- APC Back-UPS 550G-UK
Network: --------------- Netgear WNDR4500 Router - TP-Link-SG1005D Gigabit Switch
OS: ---------------------- Windows 7 Ultimate (64-bit)
CPU Info: --------------- Intel(R) Core(TM) i7 CPU 920 @ 3239.0 MHz
Memory (RAM): -------- 6136 MB
Motherboard: --------- ASUSTeK Computer INC. Rampage II Extreme
Network Adapters: -- Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller
-
HERBIEO - Advanced ReadyNAS Expert
- Posts: 522
- Joined: Wed May 23, 2012 8:58 am
- Location: UK
- ReadyNAS: Duo v2
Re: any transmission updates?
by ricostuart » Mon Jun 25, 2012 1:22 am
The v2 i think is a faster processor being arm rather than sparc. Probably should have researched the unit a little more and got a slightly faster one.
- ricostuart
- ReadyNAS Newbie
- Posts: 19
- Joined: Thu May 17, 2012 3:24 am
- ReadyNAS: NV+
Re: any transmission updates?
by ricostuart » Mon Jun 25, 2012 1:44 am
Ok, so I have upgraded to two brand new supported 2TB WD drives (which took 2 days to complete). Everything works well - streaming, write performance (well enough anyway). However, logging into its GUI is still slow, and transmission still really very very slow. I have tried installing the old bittorrent manager, added a torrent to it and it downloaded in a very short time at full speeds my broadband supports. Tried the same exact torrent on transmission, and I am still waiting for it to start. Been about 30mins so far. Transmission refresh time is ultra slow. The transmission gui program on my mac (also tested on win7 pc) takes about 10-20 seconds to request a refresh from transmission.
Do anyone else experiance similar issues?
Do anyone else experiance similar issues?
- ricostuart
- ReadyNAS Newbie
- Posts: 19
- Joined: Thu May 17, 2012 3:24 am
- ReadyNAS: NV+
Re: any transmission updates?
by Mr_B » Tue Jun 26, 2012 4:32 pm
I'm just guessing, but your likely to have low memory issues.
I've got the NV+, rather then the Duo, upgraded memory to 1GB, and stuck 4 2TB drives in it. WIth 82 torrents active, it IS slow to respond to Transmission Remote, and the NAS it self is to slow to ever hit my transfer speed limits, but it ticks along at a steady 3.5-4MB/s total. CPU & memory limitations means thats all i ever am likely to get.
On the topic of updates... super-poussin Had a falling out with his unit, so he isn't developing for our sparc units "right now". Back in march he was hoping to have a new unit by the end of the month, but it seams that didn't happen. He's still around, about 2 3 weeks ago, he said this:
I know it's not much to go on, i agree. I also want a updated version to see if it can squeeze a little extra out of my NAS, but thats all he said, here.
And as such, thats all i know.
B!
I've got the NV+, rather then the Duo, upgraded memory to 1GB, and stuck 4 2TB drives in it. WIth 82 torrents active, it IS slow to respond to Transmission Remote, and the NAS it self is to slow to ever hit my transfer speed limits, but it ticks along at a steady 3.5-4MB/s total. CPU & memory limitations means thats all i ever am likely to get.
On the topic of updates... super-poussin Had a falling out with his unit, so he isn't developing for our sparc units "right now". Back in march he was hoping to have a new unit by the end of the month, but it seams that didn't happen. He's still around, about 2 3 weeks ago, he said this:
super-poussin wrote:stay tuned
I know it's not much to go on, i agree. I also want a updated version to see if it can squeeze a little extra out of my NAS, but thats all he said, here.
And as such, thats all i know.
B!
- Mr_B
- Advanced ReadyNAS User
- Posts: 120
- Joined: Wed May 11, 2011 10:39 am
- ReadyNAS: NV+
5 posts
• Page 1 of 1
Return to General Discussion on ReadyNAS Add-ons
Who is online
Users browsing this forum: No registered users and 5 guests