[Super-Poussin] Sabnzbd request

[lowfi]

Hi,

Since hellanzb is not working could you give sab a try?

http://www.sabnzbd.org/

Many thanks

[super-poussin]

will take a look

[a.carneiro]

Oooh.... It looks very nice

[super-poussin]

bad news

The following packages have unmet dependencies:
cherokee: Depends: libcherokee-base0 (= 0.5.5.dfsg-2) but it is not installable
Depends: libcherokee-server0 (= 0.5.5.dfsg-2) but it is not installable
libapache2-svn: Depends: libc6 (>= 2.3.5-1) but 2.3.2.ds1-22sarge6.infrant1 is to be installed
libbz2-dev: Depends: libc6-dev but it is not going to be installed or
libc-dev
libdb4.4: Depends: libc6 (>= 2.3.5-1) but 2.3.2.ds1-22sarge6.infrant1 is to be installed
libneon26: Depends: libc6 (>= 2.3.5-1) but 2.3.2.ds1-22sarge6.infrant1 is to be installed
libsvn1: Depends: libc6 (>= 2.3.5-1) but 2.3.2.ds1-22sarge6.infrant1 is to be installed
libxml2: Depends: libc6 (>= 2.3.5-1) but 2.3.2.ds1-22sarge6.infrant1 is to be installed
ntop: Depends: libpcap0.7 but it is not going to be installed
Depends: libssl0.9.7 but it is not going to be installed
python: Depends: python2.3 (>= 2.3.4-18) but it is not going to be installed
subversion: Depends: libc6 (>= 2.3.5-1) but 2.3.2.ds1-22sarge6.infrant1 is to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).

[super-poussin]

I will reset to factory my duo which is used for develop it sounds like a side effect of previous tests ....

I will do that only after my vacation.

There will be no new addons betweeen August 15 and September 1st

[a.carneiro]

We'll try to cope

Have a great time on your holidays!

[super-poussin]

duo reformated everything reinstalled but it's require pyhton 2.4.3 I can only install Pyhton 2.3 on Readynas

[_mj]

duo reformated everything reinstalled but it's require pyhton 2.4.3 I can only install Pyhton 2.3 on Readynas

Can you even install Python 2.3? Could you please share how? I'm very weary of updating critical packages / dependencies.

Code: Select all

nas:~# apt-get -s install python
Reading Package Lists... Done
Building Dependency Tree... Done
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:
  libapache2-svn: Depends: libc6 (>= 2.3.5-1) but 2.3.2.ds1-22sarge6.infrant1 is to be installed
  libdb4.4: Depends: libc6 (>= 2.3.5-1) but 2.3.2.ds1-22sarge6.infrant1 is to be installed
  libneon26: Depends: libc6 (>= 2.3.5-1) but 2.3.2.ds1-22sarge6.infrant1 is to be installed
  libsvn1: Depends: libc6 (>= 2.3.5-1) but 2.3.2.ds1-22sarge6.infrant1 is to be installed
  libxml2: Depends: libc6 (>= 2.3.5-1) but 2.3.2.ds1-22sarge6.infrant1 is to be installed
  python: Depends: python2.3 (>= 2.3.4-18) but it is not going to be installed
  subversion: Depends: libc6 (>= 2.3.5-1) but 2.3.2.ds1-22sarge6.infrant1 is to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).


[Nick.123]

Im working on installing this at the min, I have most the packages installed just havent got sabnzbd to actually work yet.

Code: Select all

ReadyNASNV:~/SABnzbd-0.4.0# python2.5 -OO SABnzbd.py -v
Traceback (most recent call last):
  File "SABnzbd.py", line 44, in <module>
    import sabnzbd
  File "/root/SABnzbd-0.4.0/sabnzbd/__init__.py", line 32, in <module>
    import gzip
  File "/usr/local/lib/python2.5/gzip.py", line 9, in <module>
    import zlib
ImportError: No module named zlib
ReadyNASNV:~/SABnzbd-0.4.0#


If anyone else wants to give it a try here is what i done.

Code: Select all

# Python 2.5.2
wget http://www.python.org/ftp/python/2.5.2/Python-2.5.2.tgz
gzip -d Python-2.5.2.tgz
tar xf Python-2.5.2.tar
cd Python-2.5.2
./configure
make
make install
cd

# cheetah-2.0.1
wget http://mesh.dl.sourceforge.net/sourceforge/cheetahtemplate/Cheetah-2.0.1.tar.gz
gzip -d Cheetah-2.0.1.tar.gz
tar xf Cheetah-2.0.1.tar
cd Cheetah-2.0.1
python2.5 setup.py install
cd

#    yenc module >= 0.3
wget http://sabnzbd.sourceforge.net/yenc-0.3.tar.gz
gzip -d yenc-0.3.tar.gz
tar xf yenc-0.3.tar
cd yenc-0.3
python2.5 setup.py install
cd

#    par2cmdline >= 0.4      http://parchive.sourceforge.net/
wget http://garr.dl.sourceforge.net/sourceforge/parchive/par2cmdline-0.4.tar.gz
gzip -d par2cmdline-0.4.tar.gz
tar xf par2cmdline-0.4.tar
cd par2cmdline-0.4.tar
./configure
make
make check
make install
cd

#    unrar >= 3.6.6          http://www.rarlab.com/rar_add.htm
wget http://www.rarlab.com/rar/unrarsrc-3.7.8.tar.gz
gzip -d unrarsrc-3.7.8.tar.gz
tar xf unrarsrc-3.7.8.tar
cd unrar
make -f makefile.unix
cp unrar /usr/local/bin
cd

#    unzip >= 5.5.2          http://www.info-zip.org/
# use installed 5.5.1 release??
cd

#    feedparser >= 4.1       http://feedparser.org/
wget http://feedparser.googlecode.com/files/feedparser-4.1.zip
mkdir feedparser-4.1
cd feedparser-4.1
unzip ../feedparser-4.1.zip
python2.5 setup.py install
cd

# SABnzbd
wget http://switch.dl.sourceforge.net/sourceforge/sabnzbdplus/SABnzbd-0.4.0-src.tar.gz
gzip -d SABnzbd-0.4.0-src.tar.gz
tar xf SABnzbd-0.4.0-src.tar
cd SABnzbd-0.4.0
# pre-compile optimized
python2.5 -OO SABnzbd.py -v


[super-poussin]

apt-get install zlibc

[thibs]

I wrote a full tutorial to install SABnzbd+ on a ReadyNas Duo :
http://www.thibernet.com/442-install-sa ... adynas-duo

Have fun

[PabloCreep]

thibs, I think I'm going to marry you.

I came across a couple of hiccups, but once I'd figured out I hadn't put uniq in the right place everything compiled. Had to obviously edit the sabnzbd file we created to match the IP of the readynas, and make it executable, and also change a couple of settings in the /etc/SABnzbd/sabnzbd.ini file to reflect the IP of the nas and changed the port... then we were flying. Top do - glad I, well, you, got it working!

Cheers,
Al

[bigred15]

thibs, I think I'm going to marry you.

I came across a couple of hiccups, but once I'd figured out I hadn't put uniq in the right place everything compiled. Had to obviously edit the sabnzbd file we created to match the IP of the readynas, and make it executable, and also change a couple of settings in the /etc/SABnzbd/sabnzbd.ini file to reflect the IP of the nas and changed the port... then we were flying. Top do - glad I, well, you, got it working!

Cheers,
Al

I've been trying to get this working and followed the guide line by line but I seem to be having the same issue with uniq. Once I get to the process of installing python I get an error regarding uniq but can't seem to figure out how to fix it. I am a total linux noob and could use any help you guys can give me to get sab installed on my duo. How do I get uniq in the right place? Thanks in advance.

[bigred15]

Can anyone point me in the right direction on this? I am still getting an error that the "uniq" command does not exist when compiling python. I see the uniq file in src/usr/bin but it doesn't seem to do anything when i try uniq --help for example. Sorry for butchering all of this as I'm a total nix noob as I mentioned above. Is anyone still following this thread?

[bigred15]

I was able to get Sabnzbd+ working on my readynas duo with some help from Romain, the guy who wrote the tutorial. There is one lingering problem that I could use some guidance on. I seem to have my permissions set up properly on the Readynas, but when something gets downloaded with Sabnzbd on the readynas it seems to set the permissions so that only admin can access the files. So I have to either access a share as admin or run the process on frontview that makes all files in the share accessible to guest users. Can anyone shed some light on this problem?

Thanks