DynDns

A central place to check out community add-on releases for the ReadyNAS NV+/Duo (v1), 1100, NV, 600/X6.
Forum rules
For help with add-ons listed in this sub-forum, please post questions in this forum: General Discussion on ReadyNAS Add-ons.

These add-ons are created by third-party developers, and are not supported by NETGEAR. If you contact NETGEAR support for assistance with these add-ons, they will be unable to help you. Instead, post in the forum above to get help from the add-on developer.

DynDns

Postby super-poussin » Tue Oct 21, 2008 11:43 am

Dyndns Client
  • Description: DynDns client will let you update your dyndns host with your internet IP
  • Requirements: RAIDiator 4.1.3+
  • Platform: NV/NV+ - DUO - 11000
  • Current Version:1.0
    DynDns (10/21/08)
    • Does Not Support SSL
    • supports : easydns, zoneedit,...
      Full Features
[*]Installation Notes: please read carefully
1) After installing you must disable the service
2) then edit the ddclient.conf in webroot/ddclient share
3) then activate the service
[*]Syntax example: Do not touch the line daemon,pid,cache,ssl, use
Code: Select all
# Basic HTTPS configuration file for ddclient
#
daemon=600
pid=/var/run/ddclient.pid
cache=/ramfs/ddclient.cache
ssl=NO
use=web, web=checkip.dyndns.com/, web-skip='IP Address'
login=your-username
password=your-password
protocol=dyndns2
server=members.dyndns.org
wildcard=YES
example.dyndns.org


example for other providers:
Code: Select all
##
## ZoneEdit (zoneedit.com)
##
# server=www.zoneedit.com,              \
# protocol=zoneedit1,                   \
# login=your-zoneedit-login,            \
# password=your-zoneedit-password       \
# your.any.domain,your-2nd.any.dom

##
## EasyDNS (easydns.com)
##
# server=members.easydns.com,           \
# protocol=easydns,                     \
# login=your-easydns-login,             \
# password=your-easydns-password        \
# your.any.domain,your-2nd.any.domain

##
## Hammernode (hn.org) dynamic addresses
##
# server=dup.hn.org,                    \
# protocol=hammernode1,                 \
# login=your-hn-login,                  \
# password=your-hn-password             \
# your-hn-host.hn.org,your-2nd-hn-host.hn.org

##
## dslreports.com dynamic-host monitoring
##
# server=members.dslreports.com         \
# protocol=dslreports1,                 \
# login=dslreports-login,               \
# password=dslreports-password          \
# dslreports-unique-id

##
## OrgDNS.org account-configuration
##
# use=web, web=members.orgdns.org/nic/ip
# server=www.orgdns.org                 \
# protocol=dyndns2                      \
# login=yourLoginName                   \
# password=yourPassword                 \
# yourSubdomain.orgdns.org
##
## dnspark.com
## (supports variables: mx, mxpri)
##
# use=web, web=ipdetect.dnspark.com, web-skip='Current Address:'
# protocol=dnspark,                     \
# server=www.dnspark.com,               \
# your-host.dnspark.com

##
## NameCheap (namecheap.com)
##
# protocol=namecheap,                           \
# server=dynamicdns.park-your-domain.com,       \
# login=my-namecheap.com-login,                 \
# password=my-namecheap.com-password            \
# myhost.namecheap.com




it supports firewall and router usage for IP detection (by default it use web request )

Code: Select all
#
#use=watchguard-soho,        fw=192.168.111.1:80        # via Watchguard's SOHO FW
#use=netopia-r910,           fw=192.168.111.1:80        # via Netopia R910 FW
#use=smc-barricade,          fw=192.168.123.254:80      # via SMC's Barricade FW
#use=netgear-rt3xx,          fw=192.168.0.1:80          # via Netgear's internet FW
#use=linksys,                fw=192.168.1.1:80          # via Linksys's internet FW
#use=maxgate-ugate3x00,      fw=192.168.0.1:80          # via MaxGate's UGATE-3x00  FW
#use=elsa-lancom-dsl10,      fw=10.0.0.254:80           # via ELSA LanCom DSL/10 DSL Router
#use=elsa-lancom-dsl10-ch01, fw=10.0.0.254:80           # via ELSA LanCom DSL/10 DSL Router
#use=elsa-lancom-dsl10-ch02, fw=10.0.0.254:80           # via ELSA LanCom DSL/10 DSL Router
#use=alcatel-stp,            fw=10.0.0.138:80           # via Alcatel Speed Touch Pro
#use=xsense-aero,            fw=192.168.1.1:80          # via Xsense Aero Router
#use=allnet-1298,            fw=192.168.1.1:80          # via AllNet 1298 DSL Router
#use=3com-oc-remote812,      fw=192.168.0.254:80        # via 3com OfficeConnect Remote 812
#use=e-tech,                 fw=192.168.1.1:80          # via E-tech Router
#use=cayman-3220h,           fw=192.168.0.1:1080        # via Cayman 3220-H DSL Router
#
#fw-login=admin,             fw-password=XXXXXX         # FW login and password
#
## To obtain an IP address from FW status page (using fw-login, fw-password)
#use=fw, fw=192.168.1.254/status.htm, fw-skip='IP Address' # found after IP Address



[*]Old Versions: none

Many thanks to the jedi for helping me
If you like my add-ons - Si vous aimez mes add-ons :
EN/US:Image --- -------- FR: Image or Paypal @mail: readynas@orange.fr
Where I'm teaching
4B Perros
User avatar
super-poussin
ReadyNAS Add-ons Expert
 
Posts: 5144
Joined: Fri Jul 13, 2007 1:16 pm
Location: PG
ReadyNAS: RN516

Return to Community Add-ons for ReadyNAS NV+/Duo



Who is online

Users browsing this forum: No registered users and 3 guests