psriley wrote:It's obvious it's stuck somewhere in the boot process and booting it with a new image doesn't help. Is there anything else I can try?
LED blink behavior for 2 disk systems is three quick blinks of all disk LEDs and the backup LED, followed by an 1s delay, followed by a number of slow blinks. The number of slow blinks will be the error code.
Current error codes:
1 - Vendor mismatch
2 - No disks detected
3 - Bad contents on root partition of disks
4 - Flash error
5 - Unsupported RAID configuration
wenel wrote:I have a problem with my DUO. I changed the RAM to 512 MB Module and now after I power on the device, disk leds are blinking: disk1 led is solid for 1s and then disk2 led is solid for 1s (disk1 led is of). Power led is off. I don't know what it means I've contacted the Netgear phone support, but they told me to wait and see how long it would last...
Yes.THN wrote:Like I am looking at this security tip. Is that still needed with the latest RAIDiator?
Users browsing this forum: No registered users and 7 guests