NETGEAR ReadyNAS

by **Bob K** » Wed Sep 07, 2011 7:40 pm

Code: Select all: [list] [*]ARP Offload - Enabled [*]Auto Disable Gigabit - Disabled [*]Energy Efficient Ethernet - Enabled [*]Flow Control - Enabled [*]Green Ethernet - Enabled [*]Interrupt Moderation - Enabled [*]IPv4 Checksum Offload - Rx & Tx Enabled [*]Jumbo Frame - Disabled [*]Large Send Offload v2 (IPv4) - Enabled [*]Large Send Offload v2 (IPv6 - Enabled [*]Network Address - Not Present [*]NS Offload - Enabled [*]Priority & VLAN - Priority & VLAN Enabled [*]Receive Buffers - 512 [*]Receive Side Scaling - Enabled [*]Shutdown Wake-On-Lan - Disabled [*]Speed & Duplex - 1.0 Gbps Full Duplex [*]TCP Checksum Offload (IPv4) - Tx & Rx Enabled [*]TCP Checksum Offload (IPv6) - Tx & Rx Enabled [*]Transmit Buffers - 128 [*]UDP Checksum Offload (IPv4) - Tx & Rx Enabled [*]UDP Checksum Offload (IPv4) - Tx & Rx Enabled [*]Wake on Magic Packet - Disabled [*]Wake on Pattern Match - Disabled [/list]

Code: Select all: Network Address - Not Present NS Offload - Enabled Priority & VLAN - Priority & VLAN Enabled Receive Buffers - 512 Receive Side Scaling - Enabled Shutdown Wake-On-Lan - Disabled Speed & Duplex - 1.0 Gbps Full Duplex TCP Checksum Offload (IPv4) - Tx & Rx Enabled TCP Checksum Offload (IPv6) - Tx & Rx Enabled Transmit Buffers - 128 UDP Checksum Offload (IPv4) - Tx & Rx Enabled UDP Checksum Offload (IPv4) - Tx & Rx Enabled Wake on Magic Packet - Disabled Wake on Pattern Match - Disabled

test for Code tag