I luanch Daidar 4, but firmware version shown "corrupt Root". How to overcome it?
bcgan
Why show " Corrup Root "
3 posts
• Page 1 of 1
Why show " Corrup Root "
by bcgan23 » Sun Nov 13, 2011 1:56 am
- bcgan23
- ReadyNAS Newbie
- Posts: 9
- Joined: Mon Nov 07, 2011 8:59 pm
- ReadyNAS: 600
Re: Why show " Corrup Root "
by mdgm » Sun Nov 13, 2011 1:58 am
Did you install any add-ons recently? Or do stuff via SSH?
I would suggest you power down your ReadyNAS, remove disks (label order), connect to SATA port on PC and test them. See http://www.readynas.com/kb/faq/hardware/how_can_i_verify_that_my_disk_is_bad
You may also wish to run the memory test: http://www.readynas.com/kb/faq/hardware/is_there_a_way_i_can_verify_if_my_memory_is_good
I would suggest you power down your ReadyNAS, remove disks (label order), connect to SATA port on PC and test them. See http://www.readynas.com/kb/faq/hardware/how_can_i_verify_that_my_disk_is_bad
You may also wish to run the memory test: http://www.readynas.com/kb/faq/hardware/is_there_a_way_i_can_verify_if_my_memory_is_good
Useful links: My ReadyNAS Gear|FAQ|Hardware Compatibility List|Docs: Setup Guide, Manual|Downloads|Unofficial Tips|GPL|MDGM on Twitter|MDGM's Unofficial Guides
NB: A ReadyNas is not an excuse not to have a backup. Fire, theft, multiple disk failures, other hardware failure, floods, user negligence etc. can all result in loss of data.
How we users can contact NETGEAR Technical Support | Australia: 1300 361 254 / Other Numbers|Online Submission
Unofficial Guide for Moving from Sparc ReadyNAS to x86 ReadyNAS|Using Gmail with the ReadyNAS|XRAID Volume Size Calculator
NB: A ReadyNas is not an excuse not to have a backup. Fire, theft, multiple disk failures, other hardware failure, floods, user negligence etc. can all result in loss of data.
How we users can contact NETGEAR Technical Support | Australia: 1300 361 254 / Other Numbers|Online Submission
Unofficial Guide for Moving from Sparc ReadyNAS to x86 ReadyNAS|Using Gmail with the ReadyNAS|XRAID Volume Size Calculator
-
mdgm - ReadyNAS Enthusiast
- Posts: 28613
- Joined: Tue Feb 17, 2009 9:34 pm
- Location: Down Under
- ReadyNAS: RN312
Re: Why show " Corrup Root "
by StephenB » Sun Nov 13, 2011 4:01 am
Also, if you are re-using an old disk, you might need to delete the partitions (or erase it).
-
StephenB - Incurable ReadyNAS Junkie
- Posts: 5064
- Joined: Mon Oct 05, 2009 5:08 pm
- ReadyNAS: Pro
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest