ST2000DM001 Barracuda - 2TB
17 posts
• Page 2 of 2 • 1, 2
Re: ST2000DM001 Barracuda - 2TB
by HERBIEO » Sat Jun 16, 2012 9:30 am
I am running ST2000DM001 on a duo v2 can confirm no problems at all with these disks.
ReadyNas Duo v2 ------ Firmware: RAIDiator 5.3.7
UPS ---------------------- APC Back-UPS 550G-UK
Network: --------------- Netgear WNDR4500 Router - TP-Link-SG1005D Gigabit Switch
OS: ---------------------- Windows 7 Ultimate (64-bit)
CPU Info: --------------- Intel(R) Core(TM) i7 CPU 920 @ 3239.0 MHz
Memory (RAM): -------- 6136 MB
Motherboard: --------- ASUSTeK Computer INC. Rampage II Extreme
Network Adapters: -- Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller
UPS ---------------------- APC Back-UPS 550G-UK
Network: --------------- Netgear WNDR4500 Router - TP-Link-SG1005D Gigabit Switch
OS: ---------------------- Windows 7 Ultimate (64-bit)
CPU Info: --------------- Intel(R) Core(TM) i7 CPU 920 @ 3239.0 MHz
Memory (RAM): -------- 6136 MB
Motherboard: --------- ASUSTeK Computer INC. Rampage II Extreme
Network Adapters: -- Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller
-
HERBIEO - Advanced ReadyNAS Expert
- Posts: 522
- Joined: Wed May 23, 2012 8:58 am
- Location: UK
- ReadyNAS: Duo v2
Re: ST2000DM001 Barracuda - 2TB
by tophatcc » Sat Jul 21, 2012 7:02 pm
Above post re the drives working may relate to the Pro or higher version of Readynas. I have spent the last 2 hours with tech support who inform me that the drives are not on the HCL. They advised that the engineers have been informed of the issue and are working on adding them but there is no guarantee it will be in the next firmware release or if it ever will be resolved. Their suggestion was to upgrade to the Intel based Readynas Pro.
Further to this I have added 4 x ST2000DM001 2Tb drives after running 4 x 500gig drives. I added them one by one and they ended up all syncing and updating perfectly. The only problem is that he drive space is still 1500gig not the 6000gig it should be with xRaid. Now I will reboot the NAS and see if it does come up like the guy above mentioned but I very much doubt it.
Further to this I have added 4 x ST2000DM001 2Tb drives after running 4 x 500gig drives. I added them one by one and they ended up all syncing and updating perfectly. The only problem is that he drive space is still 1500gig not the 6000gig it should be with xRaid. Now I will reboot the NAS and see if it does come up like the guy above mentioned but I very much doubt it.
- tophatcc
- ReadyNAS Newbie
- Posts: 1
- Joined: Sat Jul 21, 2012 6:54 pm
- ReadyNAS: NV+
17 posts
• Page 2 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 1 guest