I have tried two of these in my NV+. The result was a non booting NV+. This memorymodule should be removed from the compatibility list. The user 'geekstarpilot' experienced also the same problem with this module. On the internet are more posts regarding this module using the Readynas DUO (also with problems).
So I do not recommend using this (I guess the current revision is somehow a bit different compared to the ones which other users are using with success)
KVR400X64SC3A/1G 1GB
3 posts
• Page 1 of 1
KVR400X64SC3A/1G 1GB
by owentje » Wed Jul 22, 2009 10:22 am
- owentje
- ReadyNAS Newbie
- Posts: 20
- Joined: Tue Jun 30, 2009 8:32 am
- Location: Netherlands
- ReadyNAS: Pro
Re: KVR400X64SC3A/1G 1GB
by Gnagman » Sat Nov 14, 2009 2:32 pm
Have the same problem, the KVR400x64SC3A/1G does NOT work. Remove it from the compatibility list.
- Gnagman
- ReadyNAS Newbie
- Posts: 1
- Joined: Sat Nov 14, 2009 2:28 pm
- ReadyNAS: NV+
Re: KVR400X64SC3A/1G 1GB
by Optik » Tue Aug 02, 2011 12:11 pm
Just encounted the very much earlier comments about this. By accident found positive views about this memory module (well before I found this info) - so installed on NAS Duo 2 x Tbye RAID 4.1.7 setup - has functioned perfectly from the off - now been running continuously for 5 months. Don't know the cause of the problem with higher spec NASs.
- Optik
- ReadyNAS Newbie
- Posts: 3
- Joined: Sat Jun 11, 2011 8:38 am
- ReadyNAS: Duo
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests