Unable to mount media. There is probably no media in the drive.
chaps wrote:I have just installed this R-Stuio software http://www.r-studio.com/ and after scannning it found all my files now I'm just in the process of recovering everything I can get!
I pulled disk 1 out of the DUO and plugged it into an external USB enclosure and all is going good so far...
fbmachines wrote:What RAID type did you have on your Duo?
I wonder if this would work with X-RAID?
mdgm wrote:The Duo is a 2 disk NAS so using X-RAID or RAID-1, all the data would be on disk 1. I don't think on the Duo it'd matter whether X-RAID or RAID-1 is used.
mdgm wrote:Recovery a three disk or greater X-RAID array could be more complicated.
fbmachines wrote:I wasn't sure if the proprietary X-RAID format could be understood by R-Studio.
fbmachines wrote:mdgm wrote:Recovery a three disk or greater X-RAID array could be more complicated.
It does look a little complicated but it sounds like once you figure out the RAID parameters you can save the profile for future use.
Below is a 3 disk RAID 5 example...
http://www.unformat-unerase.com/Article ... ndex.shtml
mdgm wrote:So long as it can read EXT3 volumes using the 16k block size, it should be fine with using disk 1 from two disk X-RAID array.
mdgm wrote:I guess so. If someone has used parameters to successfully recover data of a 3 or 4 disk X-RAID array it would be good if he/she could post them.
farazfastian wrote:From past two weeks i've been unsuccessfully trying different things, just found this thread today and have already tried following:
1) RStudio, i've tried this recovery tool but i can't find any of my files on readynas hdd, is there specific process for it?
2) I've also tried acmtn debian vmware and have reached to stage where it says "block size is 16384" but it doesn't show anything after that. Where can i see the my readynas files/folders? Also is there a same process to mount my another usb hdd where i want to copy my readynas data? Plz help me i've zero knowledge of Linux
Users browsing this forum: No registered users and 2 guests