After having installed the agent I can see the line in Frontview where to specify my BackupExec server address
After entering the ip-address and saving I can see the address but when I close and come back I cannot see the address anylonger.
Backup Exec and RALUS
8 posts
• Page 1 of 1
Backup Exec and RALUS
by oarmandt » Wed Sep 29, 2010 5:20 am
- oarmandt
- ReadyNAS Newbie
- Posts: 5
- Joined: Mon Aug 10, 2009 9:42 am
- ReadyNAS: Duo
Re: Backup Exec and RALUS
by mdgm » Wed Sep 29, 2010 5:21 am
What happens if you clear your web browser cache then view the page again?
Useful links: My ReadyNAS Gear|FAQ|Hardware Compatibility List|Docs: Setup Guide, Manual|Downloads|Unofficial Tips|GPL|MDGM on Twitter|MDGM's Unofficial Guides
NB: A ReadyNas is not an excuse not to have a backup. Fire, theft, multiple disk failures, other hardware failure, floods, user negligence etc. can all result in loss of data.
How we users can contact NETGEAR Technical Support | Australia: 1300 361 254 / Other Numbers|Online Submission
Unofficial Guide for Moving from Sparc ReadyNAS to x86 ReadyNAS|Using Gmail with the ReadyNAS|XRAID Volume Size Calculator
NB: A ReadyNas is not an excuse not to have a backup. Fire, theft, multiple disk failures, other hardware failure, floods, user negligence etc. can all result in loss of data.
How we users can contact NETGEAR Technical Support | Australia: 1300 361 254 / Other Numbers|Online Submission
Unofficial Guide for Moving from Sparc ReadyNAS to x86 ReadyNAS|Using Gmail with the ReadyNAS|XRAID Volume Size Calculator
-
mdgm - ReadyNAS Enthusiast
- Posts: 28567
- Joined: Tue Feb 17, 2009 9:34 pm
- Location: Down Under
- ReadyNAS: RN312
Re: Backup Exec and RALUS
by mdgm » Wed Sep 29, 2010 6:07 am
Which ReadyNAS is this on and what RAIDiator x86 firmware? What add-on version did you install?
Useful links: My ReadyNAS Gear|FAQ|Hardware Compatibility List|Docs: Setup Guide, Manual|Downloads|Unofficial Tips|GPL|MDGM on Twitter|MDGM's Unofficial Guides
NB: A ReadyNas is not an excuse not to have a backup. Fire, theft, multiple disk failures, other hardware failure, floods, user negligence etc. can all result in loss of data.
How we users can contact NETGEAR Technical Support | Australia: 1300 361 254 / Other Numbers|Online Submission
Unofficial Guide for Moving from Sparc ReadyNAS to x86 ReadyNAS|Using Gmail with the ReadyNAS|XRAID Volume Size Calculator
NB: A ReadyNas is not an excuse not to have a backup. Fire, theft, multiple disk failures, other hardware failure, floods, user negligence etc. can all result in loss of data.
How we users can contact NETGEAR Technical Support | Australia: 1300 361 254 / Other Numbers|Online Submission
Unofficial Guide for Moving from Sparc ReadyNAS to x86 ReadyNAS|Using Gmail with the ReadyNAS|XRAID Volume Size Calculator
-
mdgm - ReadyNAS Enthusiast
- Posts: 28567
- Joined: Tue Feb 17, 2009 9:34 pm
- Location: Down Under
- ReadyNAS: RN312
Re: Backup Exec and RALUS
by oarmandt » Wed Sep 29, 2010 6:18 am
It's on ReadyNas 2100 and the version is 4.2.9
- oarmandt
- ReadyNAS Newbie
- Posts: 5
- Joined: Mon Aug 10, 2009 9:42 am
- ReadyNAS: Duo
Re: Backup Exec and RALUS
by mdgm » Wed Sep 29, 2010 6:20 am
The addon may work better on newer firmware.
Btw does it still work even though you can't see the IP address in Frontview?
Btw does it still work even though you can't see the IP address in Frontview?
Useful links: My ReadyNAS Gear|FAQ|Hardware Compatibility List|Docs: Setup Guide, Manual|Downloads|Unofficial Tips|GPL|MDGM on Twitter|MDGM's Unofficial Guides
NB: A ReadyNas is not an excuse not to have a backup. Fire, theft, multiple disk failures, other hardware failure, floods, user negligence etc. can all result in loss of data.
How we users can contact NETGEAR Technical Support | Australia: 1300 361 254 / Other Numbers|Online Submission
Unofficial Guide for Moving from Sparc ReadyNAS to x86 ReadyNAS|Using Gmail with the ReadyNAS|XRAID Volume Size Calculator
NB: A ReadyNas is not an excuse not to have a backup. Fire, theft, multiple disk failures, other hardware failure, floods, user negligence etc. can all result in loss of data.
How we users can contact NETGEAR Technical Support | Australia: 1300 361 254 / Other Numbers|Online Submission
Unofficial Guide for Moving from Sparc ReadyNAS to x86 ReadyNAS|Using Gmail with the ReadyNAS|XRAID Volume Size Calculator
-
mdgm - ReadyNAS Enthusiast
- Posts: 28567
- Joined: Tue Feb 17, 2009 9:34 pm
- Location: Down Under
- ReadyNAS: RN312
Re: Backup Exec and RALUS
by oarmandt » Wed Sep 29, 2010 6:26 am
I'm planning to upgrade the 2100 tonight - so I will find out later
I don't know if it works really - I just added the address and it updates every 4 hours I heard
So I will come back tomorrow
I don't know if it works really - I just added the address and it updates every 4 hours I heard
So I will come back tomorrow
- oarmandt
- ReadyNAS Newbie
- Posts: 5
- Joined: Mon Aug 10, 2009 9:42 am
- ReadyNAS: Duo
Re: Backup Exec and RALUS
by fjp » Mon Nov 15, 2010 9:00 am
I'm having a smilar issue here... I put in the IP of the BE server, backups run fine, one or two days later, the IP address is gone and my backups fail. Is there any way to permanently insert that silly BE server IP address and have it stick?
We're on BE 2010 R2 (Media server version 13.0 rev 4164) using v13.0.0 of the BE agent on a ReadyNAS NVX Business Edition RAIDiator 4.2.15.
We're on BE 2010 R2 (Media server version 13.0 rev 4164) using v13.0.0 of the BE agent on a ReadyNAS NVX Business Edition RAIDiator 4.2.15.
- fjp
- ReadyNAS Newbie
- Posts: 3
- Joined: Fri Oct 29, 2010 4:34 am
- ReadyNAS: NVX
8 posts
• Page 1 of 1
Return to Symantec Backup Exec
Who is online
Users browsing this forum: No registered users and 2 guests