i have updated the remote on nas and windows. i get fine ip 5.xxx.xxx..xxx both on windows and nas. but i still cant get it to work.
i have tried ping the nas ip 5.xxx.... but no connection
no share.
4 posts
• Page 1 of 1
Re: no share.
by saa » Sun Oct 31, 2010 7:42 pm
emilc wrote:i have updated the remote on nas and windows. i get fine ip 5.xxx.xxx..xxx both on windows and nas. but i still cant get it to work.
i have tried ping the nas ip 5.xxx.... but no connection
I am experiencing the same issue. Wish there was some way to debug this!
Thanks,
Scott
- saa
- ReadyNAS Newbie
- Posts: 11
- Joined: Thu Oct 21, 2010 11:04 am
Re: no share.
by mdgm » Tue Nov 02, 2010 2:53 am
Could you try installing ReadyNAS Remote 1.0.9.46 on your ReadyNAS? There's also an updated PC client.
See https://remote.readynas.com/download.html
See https://remote.readynas.com/download.html
Useful links: My ReadyNAS Gear|FAQ|Hardware Compatibility List|Docs: Setup Guide, Manual|Downloads|Unofficial Tips|GPL|MDGM on Twitter|MDGM's Unofficial Guides
NB: A ReadyNas is not an excuse not to have a backup. Fire, theft, multiple disk failures, other hardware failure, floods, user negligence etc. can all result in loss of data.
How we users can contact NETGEAR Technical Support | Australia: 1300 361 254 / Other Numbers|Online Submission
Unofficial Guide for Moving from Sparc ReadyNAS to x86 ReadyNAS|Using Gmail with the ReadyNAS|XRAID Volume Size Calculator
NB: A ReadyNas is not an excuse not to have a backup. Fire, theft, multiple disk failures, other hardware failure, floods, user negligence etc. can all result in loss of data.
How we users can contact NETGEAR Technical Support | Australia: 1300 361 254 / Other Numbers|Online Submission
Unofficial Guide for Moving from Sparc ReadyNAS to x86 ReadyNAS|Using Gmail with the ReadyNAS|XRAID Volume Size Calculator
-
mdgm - ReadyNAS Enthusiast
- Posts: 28615
- Joined: Tue Feb 17, 2009 9:34 pm
- Location: Down Under
- ReadyNAS: RN312
Re: no share.
by saa » Tue Nov 02, 2010 9:39 am
mdgm,
I was able to get it working last night -- I found the troubleshooting drive at:
http://www.readynas.com/download/remote ... _guide.pdf
What fixed it for me was Step 14, which describes how to remove the gateway in the leaf adapter.
Thanks! Scott
I was able to get it working last night -- I found the troubleshooting drive at:
http://www.readynas.com/download/remote ... _guide.pdf
What fixed it for me was Step 14, which describes how to remove the gateway in the leaf adapter.
Thanks! Scott
- saa
- ReadyNAS Newbie
- Posts: 11
- Joined: Thu Oct 21, 2010 11:04 am
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests