Hi,
I've been using NV+ for a few months now, it's been working like a charm, until recently.
I'm using:
OSX 10.6.7
ReadyNAS NV+ [X-RAID]
RAIDiator 4.1.7 [1.00a043]
I've been using the time machine feature before and there was no problem. However, I wanted to change the frequency of backup from every hour to every day. I used several method including changing the plist file from 3600 to a different number. Long story short, the method didn't seem to work and it even screwed it up and time machine started to act crazy. I tried to change the number back and no matter what I do the time machine on/off switch is always at the off position. I did the "full reset" method of deleting the timemachine.plist file and reselect the drive.
From this point on, time machine didn't work at all. I could select the drive "readynas" in time machine, input the password. But then the "available", "oldest backup", Latest backup" just flash once with a number and goes to "--". There's a 120 second countdown and when it's finished, nothing happens. Then the "Next backup" shows "Automatic backup off" even though the switch is at the ON position. If I click the "backup now" in menu bar, nothing happens.
How do I fix the problem? Ideally I'd like to have the backup back. If it's not possible I can start from scratch, but the primary concern is also to set the time machine back to normal and I can change the frequency too. Any idea how to do this?
Thanks.
Mike

