Duo fails after 4.1.8 upgrade. #17049330

[lhammer]

After upgrading my readynas duo from 4.1.7 to 4.1.8, it will not fully restart. The duo is configured with 2 * 500 Gb harddrives.

Raidar finds the readynas duo and the state is always: "Filesystem check, 100%" and the Setup button is not available. The blue lamp and the disk 2 lamp are blinking slowly. I had it on for a week, and the situation was still the same.

I removed disk 2, in case it was defect. I left the duo on for 3 days, and still the state is "Filesystem check, 100%" and the blue lamp and the disk 2 lamp are blinking.

Then I tried an OS reinstall as described in http://www.readynas.com/kb/faq/boot/how_do_i_use_the_boot_menu. The result is exactly the same.

Any good suggestions on how I can get back in touch with my Duo?

[arjoseph]

I recommend that you contact support. Once you get a case #, please edit the subject of your post and add the case # at the end. Thanks.