RAIDiator-x86 4.2.19 installed, but Update shows it as new
5 posts
• Page 1 of 1
RAIDiator-x86 4.2.19 installed, but Update shows it as new
by carter3d » Tue Dec 13, 2011 9:44 am
I have RAIDiator-x86 4.2.19 installed, but the Update tab shows 4.2.19 available for upgrade. Prior to this release, if I checked for an update, it would only show new versions of code, not the one I already have installed. I have seen this on my ReadyNAS Pro, and also a friend's ReadyNAS Ultra.
- carter3d
- ReadyNAS Newbie
- Posts: 2
- Joined: Tue Dec 13, 2011 9:38 am
- ReadyNAS: Pro
Re: RAIDiator-x86 4.2.19 installed, but Update shows it as n
by chirpa » Tue Dec 13, 2011 11:08 am
The sentence above the new firmware should say that it is already installed, but you can re-apply if you like.
Lifetime member of the Jedi Council Alumni im on the twitter DropBox? ReadyDATA?
Hot off the press: banned from forum1.netgear.com! | RNOS6 on existing x86 | RNOS6 in VM | RAIDiator-x86 in VM | ReadyDATA in VM
Hot off the press: banned from forum1.netgear.com! | RNOS6 on existing x86 | RNOS6 in VM | RAIDiator-x86 in VM | ReadyDATA in VM
-
chirpa - Jedi Council Alumni
- Posts: 15569
- Joined: Mon Sep 24, 2007 11:52 am
- Location: San Jose, CA
- ReadyNAS: Repertoire
Re: RAIDiator-x86 4.2.19 installed, but Update shows it as n
by carter3d » Tue Dec 20, 2011 9:41 am
It used to say that the firmware was already installed, but not any more. Now it just says Perform System Update.
- carter3d
- ReadyNAS Newbie
- Posts: 2
- Joined: Tue Dec 13, 2011 9:38 am
- ReadyNAS: Pro
Re: RAIDiator-x86 4.2.19 installed, but Update shows it as n
by readysecure1985 » Tue Dec 20, 2011 10:21 am
As long as there are no issues, this shouldn't be something of worry.
NETGEAR ReadyNAS Support
Contact Information: http://support.netgear.com/general/contact/default.aspx
(US/Canada) 1-888-NETGEAR or 1-855-PRO-SAFE / (UK) +44(0)8448 75 4000
Contact Information: http://support.netgear.com/general/contact/default.aspx
(US/Canada) 1-888-NETGEAR or 1-855-PRO-SAFE / (UK) +44(0)8448 75 4000
- readysecure1985
- NETGEAR Support
- Posts: 758
- Joined: Wed Jul 13, 2011 10:20 am
- ReadyNAS: RN516
Re: RAIDiator-x86 4.2.19 installed, but Update shows it as n
by mdgm » Tue Dec 20, 2011 3:42 pm
If I remember correctly, it's a known bug with 4.2.19 that it doesn't say the firmware is already installed. As mentioned above it's nothing to worry about.
Useful links: My ReadyNAS Gear|FAQ|Hardware Compatibility List|Docs: Setup Guide, Manual|Downloads|Unofficial Tips|GPL|MDGM on Twitter|MDGM's Unofficial Guides
NB: A ReadyNas is not an excuse not to have a backup. Fire, theft, multiple disk failures, other hardware failure, floods, user negligence etc. can all result in loss of data.
How we users can contact NETGEAR Technical Support | Australia: 1300 361 254 / Other Numbers|Online Submission
Unofficial Guide for Moving from Sparc ReadyNAS to x86 ReadyNAS|Using Gmail with the ReadyNAS|XRAID Volume Size Calculator
NB: A ReadyNas is not an excuse not to have a backup. Fire, theft, multiple disk failures, other hardware failure, floods, user negligence etc. can all result in loss of data.
How we users can contact NETGEAR Technical Support | Australia: 1300 361 254 / Other Numbers|Online Submission
Unofficial Guide for Moving from Sparc ReadyNAS to x86 ReadyNAS|Using Gmail with the ReadyNAS|XRAID Volume Size Calculator
-
mdgm - ReadyNAS Enthusiast
- Posts: 28627
- Joined: Tue Feb 17, 2009 9:34 pm
- Location: Down Under
- ReadyNAS: RN312
5 posts
• Page 1 of 1
Return to Installation and Upgrade
Who is online
Users browsing this forum: No registered users and 2 guests