DNSSEC Appliance (DAP) 0.8.4
- Description:DAP is a DNSSEC Appliance that brings the fuzzy warm feeling of having secure DNS as close as possible to your home office or small office. DNSSEC protects clients from forged DNS data. Answers to DNS requests are digitally signed and validated.
- Requirements: RAIDiator 4.1.8 or newer
- Platform: Sparc (Duo, NV, NV+, X6, 1100)
- Current Version:
DAP 0.8.4 v0.2.5 - Changes in this release:
- None, initial public release
- The default credentials after installation are dns / netgear1
- The default port the web interface listens on is 8053 - Details/Installation:
- For generic add-on installation instructions please see Add-On Installation
- Configuration
- After installation DAP will already be active and running. However, of the services it provides only DNS (with DNSSEC) is started up automatically. If you want to enable DHCP or even TFTP you have to do this through DAP's management interface. To reach that, either click on "Manage DAP" on it's pane in the "Installed Add-Ons" list or visit ''http://ip.of.your.NAS:8053/" in your browser.
- This page is password protected. The default username/password combination is dns / netgear1. Please make sure to change the password!
- For more information about the story behind DAP and its configuration please visit Jan-Piet Mens's terrfic page about the DNSSEC Appliance.
- After installation DAP will already be active and running. However, of the services it provides only DNS (with DNSSEC) is started up automatically. If you want to enable DHCP or even TFTP you have to do this through DAP's management interface. To reach that, either click on "Manage DAP" on it's pane in the "Installed Add-Ons" list or visit ''http://ip.of.your.NAS:8053/" in your browser.
