2 TB Drives Supported Ultra 4 Plus - High Speed

Please post any presales questions about the ReadyNAS product here.

2 TB Drives Supported Ultra 4 Plus - High Speed

Postby boblam » Sat Apr 21, 2012 2:22 pm

I am interested in the ReadyNAS Ultra 4 Plus, but most that I find are diskless. What is a fast 2 GB drive that will work with this device?

For example, it looks like most sites have:
Seagate Barracuda Green ST2000DL003 2TB 5900 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive ($120)

But for the same price, I can get the
Seagate Barracuda ST2000DM001 2TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive ($120)
It would seem that this drive would be faster based on teh 7200 RPM than the drive above.

It looks like the one that I have seen in the performance testing is (but cost substantially more) is:
Seagate Constellation ES 2 TB 7200 RPM SATA 3 GB/s 64 MB Cache 3.5-Inch Hard Drive - ST32000644NS ($290)
but it would seem like this should be slower based on 3 GB/s

Any thoughts on a fast 2 TB drive that works with Ultra 4 Plus?

Any advice on where to purchase this device / drives?

I'm also confused as to why most vendors sell this as part # RNDP400U-100NAS and then reference iSCSI.
boblam
Advanced ReadyNAS User
 
Posts: 105
Joined: Wed Jan 18, 2006 6:16 pm

Re: 2 TB Drives Supported Ultra 4 Plus - High Speed

Postby StephenB » Sat Apr 21, 2012 3:30 pm

boblam wrote:It looks like the one that I have seen in the performance testing is (but cost substantially more) is:
Seagate Constellation ES 2 TB 7200 RPM SATA 3 GB/s 64 MB Cache 3.5-Inch Hard Drive - ST32000644NS ($290)
but it would seem like this should be slower based on 3 GB/s
Not really. The 3 GB/s SATA speed is much faster than the raw drive speed. The reason for the higher price is that these are enterprise (server) class drives, not desktop drives.

boblam wrote:Any thoughts on a fast 2 TB drive that works with Ultra 4 Plus?
I think you found them. Green drives will be somewhat slower than the 7200 rpm drives (10% is a number frequently cited here). Also check the HCL, since Netgear support is limited if get drives that are not on their list.

boblam wrote:Any advice on where to purchase this device / drives?
Someplace that will let you exchange them in a 30 day window for new drives if one fails. Amazon or Newegg both have this policy. Manufacturer replacements are refurbished, so it is best to have a retailer that has a good replacement policy.

boblam wrote:I'm also confused as to why most vendors sell this as part # RNDP400U-100NAS and then reference iSCSI.
What are you confused about? iSCSI is a product feature.
User avatar
StephenB
Incurable ReadyNAS Junkie
 
Posts: 5095
Joined: Mon Oct 05, 2009 5:08 pm
ReadyNAS: Pro

Re: 2 TB Drives Supported Ultra 4 Plus - High Speed

Postby boblam » Sat Apr 21, 2012 7:21 pm

Thanks for the feedback.

My only confusion on the iSCSI part is that when I look at purchasing the device, there is typically a model number like:
RNDP400U-100NAS

Wasn't sure if the suffix (100NAS) really meant something or just an adder to the base part number for vendor identification. I wanted to make sure I didn't need different drives or the device had different features based on the suffix.

I'm thinking about the Seagate Barracuda ST2000DM001 2TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive ($120)
It looks like people have had success using it on the community hardware list (viewtopic.php?f=83&t=58882). The actual HCL looks pretty limited and almost impossible to purchase drives from (http://www.readynas.com/?page_id=82).

Anyone have an issue with this drive?
boblam
Advanced ReadyNAS User
 
Posts: 105
Joined: Wed Jan 18, 2006 6:16 pm

Re: 2 TB Drives Supported Ultra 4 Plus - High Speed

Postby mdgm » Sat Apr 21, 2012 8:21 pm

In RNDP400U-100NAS, the 100 means v1 and the NAS is the region code (North America, I think).

It is recommended that you stick to the compatibility list. If you have issues using drives outside the list NetGear will be unable to help.
Useful links: My ReadyNAS Gear|FAQ|Hardware Compatibility List|Docs: Setup Guide, Manual|Downloads|Unofficial Tips|GPL|MDGM on Twitter|MDGM's Unofficial Guides
NB: A ReadyNas is not an excuse not to have a backup. Fire, theft, multiple disk failures, other hardware failure, floods, user negligence etc. can all result in loss of data.
How we users can contact NETGEAR Technical Support | Australia: 1300 361 254 / Other Numbers|Online Submission
Unofficial Guide for Moving from Sparc ReadyNAS to x86 ReadyNAS|Using Gmail with the ReadyNAS|XRAID Volume Size Calculator
User avatar
mdgm
ReadyNAS Enthusiast
 
Posts: 28628
Joined: Tue Feb 17, 2009 9:34 pm
Location: Down Under
ReadyNAS: RN312

Re: 2 TB Drives Supported Ultra 4 Plus - High Speed

Postby StephenB » Sun Apr 22, 2012 4:10 am

Also, iSCSI is a software feature, and is totally unrelated to the hardware specifications and drive choices.
User avatar
StephenB
Incurable ReadyNAS Junkie
 
Posts: 5095
Joined: Mon Oct 05, 2009 5:08 pm
ReadyNAS: Pro

Re: 2 TB Drives Supported Ultra 4 Plus - High Speed

Postby PapaBear » Sun Apr 22, 2012 6:43 am

Yes, the NAS is North America and comes with the NEMA standard 3 prong grounded modular cord. Other regions that I am familiar with (thanks to the international flavor of this forum) is AUS for Australia (and I think New Zealand) and EUS for the European Community. On older units such as the NV+ (v1) now discontinued had a UK specific designation, but now from what users are reporting is that the EUS units have both the UK modular cord as well as the European continent modular cord. The NA units are 110/120 volts whereas I believe most of the rest of the international units are 220/240 volts (but I could be wrong on that).
Remember - the NAS is not a backup plan.

Backup = Good, No Backup = Bad
User avatar
PapaBear
ReadyNAS Junkie
 
Posts: 3571
Joined: Mon May 31, 2010 1:33 pm
Location: South Georgia
ReadyNAS: NVX


Return to Presales



Who is online

Users browsing this forum: No registered users and 1 guest