by PapaBear » Tue May 22, 2012 5:54 am
On mine, once I had them open, I worked the release about 20 or 30 time on each tray to wear the parts in. I think it's the mold marks on the release and the fact that the button doesn't have the leverage to overcome the friction when new. While they were still a bit stiff, I never had one stick again. If they were resistant after that, I would put my left hand behind the unit and use my right thumb to apply the pressure. I would have loved to replace mine as well, but didn't think the money was well spent. I didn't open the releases that often either.
Some member sprayed the release from the back with silicon spray, but I was leery of doing that.
Remember - the NAS is not a backup plan.
Backup = Good, No Backup = Bad