RAIDar is the discovery agent program used to setup/detect your ReadyNAS in the Windows/Mac environment. In the absense of the RAIDar software, or using any UNIX OS including LINUX, you can use the following instructions to configure the ReadyNAS.
1. Open a terminal session and run:
# nmblookup -R VOLUME
If you have specified a different workgroup, you can replace VOLUME with that workgroup name.
2. Use the IP address that's returned and specify the address in a web browser, appended with "/admin". For instance, if the returned address is 192.168.7.100, use the following address: http://192.168.7.100/admin
You'll get a login prompt. The default login and password is "admin" and "infrant1". Download the Quick Installation guide from our support site and just follow through (skipping the RAIDar part). As of RAIDiator 4.0, the default password is "netgear1".
Hope that helps.